4349B
Sux
When a command has specied sux, the sux multiplier and sux units (The sux multiplier
must be used with the sux unit.) can be used with parameters.
10
10
10
10
For example,
The sux is optional and can be omitted. The suxes available for the commands are
described in the reference for each command.
Multiple Messages
To send more than one command in the same message, you must separate the commands with a
semicolon:
Query and Response Message Syntax
All subsystem commands can be queried except for the commands described as \no query" in
the command reference. To send a query message, add
A response message may contain both commas and semicolons as separators. When a single
query command returns multiple values, a comma is used to separate each data item. When
multiple queries are sent in the same message, the group of data items corresponding to each
query are separated by a semicolon. For example, the ctitious query
might return a response message of:
After the message,
Table 5-1. Sux Multiplier
Denition
Sux Multiplier
(Milli)
-3
(Micro)
-6
(Nano)
-9
(Pico)
-12
is always sent as a response message terminator.
Sux Unit
(ampere)
(second)
is a parameter which means 30 ms
after last command mnemonic.
GPIB Reference
5-7