Agilent Technologies 4349B Manual page 123

4349B
INITiate Subsystem
The INITiate subsystem controls the initiation of the trigger system. It indicates all trigger
sequences as a group. The detailed description of trigger system is in \Trigger System".
COMMAND
INITiate
:CONTinuous
[:IMMediate]
:INITiate[:IMMediate]
The
the INITIATE state. This command causes the trigger system to initiate and complete one full
trigger cycle, returning to IDLE on completion. (No query)
If the 4349B is not in IDLE or if
command has no e ect on the trigger system and an error 213 is generated.
:INITiate:CONTinuous
The
continuously initiated.
, continuously initiated.
, not continuously initiated.
Query response is
PARAMETER
< Boolean >
command causes all sequences to exit the IDLE state and enter
f j j
ON OFF
command sets or queries whether or not the trigger system is being
.
is set to
j g
1 0
INITiate Subsystem
, an
GPIB Reference 5-19