Agilent Technologies 4349B Manual page 118

:DATA:FEED DBUF,
Sets or queries whether or not measurement data is fed into data bu er,
The query needs parameter,
form is
< data handle >
(null string)
f
Query response is
:DATA:FEED:CONTrol DBUF,
Sets or queries whether or not data is fed into data bu er,
is speci ed by
set to .
When the data bu er ,
feed into .
The
name. So, the query form is
feeds data into data bu er,
no data is fed.
At ,
Query response is
Note
When data bu er,
set(refer to \Operation Status Register").
:DATA:POINts DBUF,
Sets or queries size of data bu er,
into is de ned by this command.
This command returns the data bu er pointer to point to the head of the bu er. After that,
data will be stored starting from the head of the bu er.
query must have the parameter,
query form is
< numeric value > is,
numeric 1 to 50
Query response is < numeric value > .
5-14 GPIB Reference
< >
data handle
.
description
set to feed measured data into the data bu er
set not to feed data into the data bu er
j g
.
f
ALWays
command. This command has no e ect if
is full, a bit in the status register is set and no more data can be
query must have the parameter,
is set to
.
, is full, the standard operation status resister is
<
numeric value
. The amount of measurement data that can be stored
.
, which is the data bu er's name. So, the query
j g
NEVer
. The data set by this command
, which is the data bu er's
.
, whenever new data is available
.
>
, which is data bu er's name. So, the
4349B
.
is