Agilent Technologies 4349B Manual page 119

4349B
DISPlay Subsystem
The DISPlay subsystem controls the selection of the channel displayed and the display mode.
COMMAND
DISPlay
:ENABle
:WINDow
Note
The state of each channel's display mode, display digits and display mode of
the Measurement Settings are linked.
:DISPlay:ENABle
Controls or queries whether the display is ON or OFF.
, set display visible.
, set display blank.
Query response is
:DISPlay:WINDow
Selects the channel to be displayed and controls whether or not the display is turned ON, or
queries whether or not the selected channel is set to ON.
,
,
Query response is
:DISPlay:WINDow
Selects the displayed channel and display mode.
displays the measurement results of selected channel.
displays the comparison results of all channels.
Query response is
f j j j g
1 2 3 4
[:STATe]
:TEXT1
:DIGit
:PAGE
:TEXT2
:PAGE
f j j j
ON OFF 1
.
f j j j g
1 2 3 4 [:STATe]
selects the displayed channel.
displays selected channel.
sets the display blank.
.
f j j j g
1 2 3 4 :TEXT1:PAGE
selects the displayed channel.
.
PARAMETER
< Boolean >
< Boolean >
f j j g
3 4 5
f j g
1 2
f j j g
1 2 3
g
0
f j j
ON OFF 1
f j g
1 2
DISPlay Subsystem
j g
0
GPIB Reference 5-15