Rear Panel - Agilent Technologies 4349B Manual

4349B

Rear Panel

This section gives a guided tour of the rear panel. For a detailed description of each item on
the rear panel, see Chapter 3.
1. GPIB Interface is used to control the 4349B from an external controller using GPIB
command.
2. Handler Interface is used to synchronize timing with an external handler machine.
3. Ext Trigger Terminal is used to trigger a measurement by external signal.
4. Serial Number Plate gives the instrument's manufacturing information.
5. Line Voltage Selector Switch is used to set the 4349B to the voltage of the AC power
source.
6. Line Fuse Holder
7. Power Cord Receptacle
Getting Started 1-7