Agilent Technologies 4349B Manual page 37

4349B
15. Local Key returns the 4349B to the local mode from the GPIB remote mode.
(Shift) Address Key sets the GPIB address.
16. Recall Key recalls instrument state data from the internal memory.
(Shift) Save Key stores instrument state data to the internal memory.
17. High Limit Key sets the upper comparator limit value.
18. Low Limit Key sets the lower comparator limit value.
19. 0 Key / (Shift) Key Lock key toggles to disable
and enable the front panel key input.
20. . (point) key / (Shift) Reset Key resets the
4349B to the default state.
21. (minus) Key / (Shift)Con guration Key sets
the beeper and the power line frequency, and
executes the internal test.
22. Enter Key enters the input value to the 4349B.
23. 2 Key / (Shift) Contact Check Key toggles contact
check function between ON and OFF.
24. 1 Key / (Shift) Comparator Key toggles
the comparator function between ON and OFF.
25. 4 Key / (Shift) Open key takes OPEN correction data.
26. 5 Key
27. 7 Key / (Shift) Minimum Key inputs the minimum value when setting a parameter.
28. 8 Key / (Shift) Maximum Key enters the maximum value when setting a parameter.
29. 9 Key
30. BLUE Shift Key activates the secondary functions printed above the front-panel keys.
Note
In this manual, the BLUE shift key is expressed as
not labelled with \blue".
31. 6 Key
32. Exponential Key enters exponent value when entering numeric values.
33. Back Space Key erases the last character entered when entering numeric values.
34. 3 Key
, the top of the key is
Getting Started 1-5