Table of Contents
Advertisement
Chapter 4: Installing the Switch on a Wall
Wall Studs
Wall
82
18XTQ or AT-x550-18XSQ Switch are listed here:
Width: 55.9 centimeters (22 inches)
Height: 35.6 centimeters (14 inches)
Thickness: 2.5 centimeters (1 inch)
The recommended minimum dimensions of the plywood base for the AT-
x550-18XSPQm Switch are listed here:
Width: 55.9 centimeters (22 inches)
Height: 61.0 centimeters (24 inches)
Thickness: 2.5 centimeters (1 inch)
The dimensions assume the wall studs are 41 centimeters (16 inches)
apart. You might need to adjust the width of the base if the distance
between the studs in your wall is different than the industry standard.
You should install the plywood base on the wall and then install the switch
on the base. Refer to Figure 42.
Step 1: Install the
plywood base on
the wall.
Figure 42. Steps to Installing the Switch with a Plywood Base
Plywood
Base
Step 2: Install the
switch on the
plywood base.
Advertisement
Table of Contents
