Cli; Commands Available; Contextual Help - Eaton Network-M2 User Manual

CLI

7.7 CLI

CLI can be accessed through:
• SSH
• Serial terminal emulation (refer to section
Module>>>Accessing the card through serial terminal
It is intended mainly for automated configuration of the network and time settings of the network card. It can also be used for
troubleshooting and remote reboot/reset of the network interface in case the web user interface is not accessible.
Warning: Changing network parameters may cause the card to become unavailable remotely. If this happens it can only be
reconfigured locally through USB.

7.7.1 Commands available

You can see this list anytime by typing in the CLI:
?

7.7.2 Contextual help

You can see this help anytime by typing in the CLI:
help
Information – 242
Servicing the Network Management Module>>>Installing the Network
emulation).