Eaton Network-M2 User Manual page 83

Email notification settings
SMTP settings
3.7.1.4.1 For other settings
For other settings, see the
No email
Server IP/Hostname — blank
SMTP server authentication — disabled
Port — 25
Default sender address —
device @networkcard.com
Hide IP address from the email body — disabled
Secure SMTP connection — enabled
Verify certificate authority — disabled
SMTP server authentication — disabled
Information>>>Default settings
5 configurations maximum
Custom name — 128 characters maximum
Email address — 128 characters maximum
Hide IP address from the email body — enable/disabled
Status — Active/Inactive
• Alarm notifications
Active — No/Yes
All card events – Subscribe/Attach logs
Critical alarm – Subscribe/Attach logs
Warning alarm – Subscribe/Attach logs
Info alarm – Subscribe/Attach logs
All device events – Subscribe/Attach measures
/Attach logs
Critical alarm – Subscribe/Attach measures/
Attach logs
Warning alarm – Subscribe/Attach measures/
Attach logs
Info alarm – Subscribe/Attach measures/
Attach logs
Always notify events with code
Never notify events with code
• Schedule report
Active — No/Yes
Recurrence – Every day/Every week/Every
month
Starting – Date and time
Card events – Subscribe/Attach logs
Device events – Subscribe/Attach measures/
Attach logs
Server IP/Hostname — 128 characters maximum
SMTP server authentication — disable/enable (Username/
Password — 128 characters maximum)
Port — x-xxx
Sender address — 128 characters maximum
Hide IP address from the email body — enable/disabled
Secure SMTP connection — enable/disable
Verify certificate authority — disable/enable
parameters section.
Contextual help of the web interface – 83
Settings