Ping And Ping6 - Eaton Network-M2 User Manual

CLI
7.7.10.3 Examples of usage
-> Display Link status and MAC address
netconf -l
-> Set Auto negotiation to Link
netconf -s auto
-> Set custom hostname
netconf -f hostname
-> Set Adress, Netmask and Gateway
netconf -i manual
-> Disable IPv6
netconf -6
7.7.10.4 Specifics
7.7.10.5 Access rights per profiles
netconf

7.7.11 ping and ping6

7.7.11.1 Description
Ping and ping6 utilities are used to test network connection.
7.7.11.2 Help
ping
The ping utility uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.
datagrams (``pings'') have an IP and ICMP header, followed by a ``struct
timeval'' and then an arbitrary number of
the packet.
-c
-h
<Hostname or IP>
ping6
The ping6 utility uses the ICMP protocol's mandatory ECHO_REQUEST datagram
to elicit an ICMP ECHO_RESPONSE from a host or gateway.
datagrams (``pings'') have an IP and ICMP header, followed by a ``struct
timeval'' and then an arbitrary number of
the packet.
-c
<IPv6 address>
Information – 250
ups-00-00-00-00-00-00
192.168.0.1 255.255.255.0 192.168.0.2
disable
Administrator
Specify the number of echo requests to be sent
Specify maximum number of hops
Host name or IP address
Specify the number of echo requests to be sent
IPv6 address
Operator
(read-only)
ECHO_REQUEST
``pad'' bytes used to fill out
ECHO_REQUEST
``pad'' bytes used to fill out
Viewer
(read-only)