Eaton Network-M2 User Manual page 134

Settings
• The log in screen appears.
• Enter the user name in the User Name field.
• Enter the password in the Password field.
• Click Login. The Network Module web interface appears.
STEP 2: Navigate to Protection/Agents list page.
STEP 3: In the Pairing with shutdown agents section, select the time to accept new agents and press the Start button
and Continue. During the selected timeframe, new agent connections to the Network Module are automatically trusted and
accepted.
STEP 4: Action on the agent ( IPP/IPM ) while the time to accepts new agents is running on the Network Module
Remove the Network
Eaton\IntelligentPowerProtector\configs\tls.
Card wrong timestamp leads to "Full acquisition has failed" error message on Software
Symptoms:
IPP/IPM shows the error message "The full data acquisition has failed" even if the credentials are correct.
Possible cause:
The Network module timestamp is not correct.
Probably the MQTT certificate is not valid at Network module date.
Action:
Set the right date,
help>>>Settings>>>General>>>System details>>>Time & date settings
3.7.7.8.1 For other issues
For details on other issues, see the Troubleshooting section.
Contextual help of the web interface – 134
module certificate
time and timezone.
file(s) *.0 that is
If possible, use a
section.
(are) located in
NTP server, refer
the folder
to Contextual