Eaton Network-M2 User Manual page 122

Settings
3.7.6.4.1 For other settings
For other settings, see the
3.7.6.5 Access rights per profiles
Modbus*
*for INDGW only
3.7.6.5.1 For other access rights
For other access rights, see the
3.7.6.6 CLI commands
modbus_message_display
This section is only for the Modbus Network Module INDGW
Description
modbus_message_display restarts the server and displays Modbus message. This command allow you to verifiy that Modbus
server is working as expected.
Help
modbus_message_display
--help Restart server and display modbus message
-h Restart server and display modbus message
Contextual help of the web interface – 122
Information>>>Default settings
Administrator
Information>>>Access rights per
parameters section.
Operator
profiles section.
Viewer