Snmp - Eaton Network-M2 User Manual

traceroute and traceroute6
Description
Traceroute and traceroute6 utilities are for checking the configuration of the network.
Help
traceroute
-h
<Hostname or IP>
traceroute6
-h
<IPv6 address>
3.7.4.5.1 For other CLI commands
See the CLI commands in the Information>>>CLI section.

3.7.5 SNMP

This tab contains settings for SNMP protocols used for network management systems.
Changes to authentication settings need to be confirmed by entering a valid password for the active user account.
3.7.5.1 SNMP tables
The default port for SNMP is 161 and normally this should not be changed. Some organizations prefer to use non-
standard ports due to cybersecurity, and this field allows that.
Specify maximum number of hops
Remote system to trace
Specify maximum number of hops
IPv6 address
Contextual help of the web interface – 111
Settings