Logs; Default Settings And Possible Parameters - Meters - Eaton Network-M2 User Manual

Meters
• None
• Scheduled
• In progress
• Aborted
• Done

3.3.6 Logs

This log configuration allows to define the log acquisition frequency of the Device measures only.
The sensors measures logs acquisition is not settable and done every minutes. Sensors measures logs are
accessible in Environment menu.
3.3.6.1 Download
Press the
If available, possible measures are listed below:
• Input Voltage (V)
• Input Frequency (Hz)
• Bypass Voltage (V)
• Bypass Frequency (Hz)
• Output Voltage (V)
• Output Frequency (Hz)
• Output Current (A)
• Output Apparent Power (VA)
• Output Active Power (W)
• Output Power Factor
• Output Percent Load (%)
• Battery Voltage (V)
• Battery Capacity (%)
• Battery Remaining Time (s)

3.3.7 Default settings and possible parameters - Meters

Meters/Logs
Contextual help of the web interface – 48
icon on the top right to download the Device log file.
Default setting
Log measures every — 60s
Possible parameters
Log measures every — 3600s maximum