Eaton Network-M2 User Manual page 204

Installing the EMP
Bottom mounting capabilities:
• magnets
• keyholes
• tie wraps
• nylon fastener
6.3.2.1 Rack mounting with keyhole example
6.3.2.2 Rack mounting with tie wraps example
To mount the EMP on the door of the rack, use the supplied cable ties.
Servicing the EMP – 204
To mount the EMP on the rack, use the supplied screw, washer and nut. Then, mount the EMP on the
screw and tighten it.
Side mounting:
• magnets
• tie wraps