Eaton Network-M2 User Manual page 107

HTTPS
Syslog
3.7.4.3.1 For other settings
For other settings, see the
3.7.4.4 Access rights per profiles
Network & Protocols
3.7.4.4.1 For other access rights
For other access rights, see the
Port — 443
Inactive
• Server#1
Name – Primary
Status – Disabled
Hostname – empty
Port – 514
Protocol – UDP
Message transfer method – Non transparent
framing
Using unicode byte order mask (BOM) – disabled
• Server#2
Name – empty
Status – Disabled
Hostname – empty
Port – 514
Protocol – UDP
Message transfer method – DIsabled in UDP
Using unicode byte order mask (BOM) – disabled
Information>>>Default settings
Administrator
Information>>>Access rights per
Port — x-xxx
Inactive/Active
• Server#1
Name – 128 characters maximum
Status – Disabled/Enabled
Hostname – 128 characters maximum
Port – x-xxx
Protocol – UDP/TCP
Message transfer method – Non transparent
framing
Using unicode byte order mask (BOM) – disable/
enable
• Server#2
Name – 128 characters maximum
Status – Disabled/Enabled
Hostname – 128 characters maximum
Port – x-xxx
Protocol – UDP/TCP
Message transfer method (in TCP) – Octet
counting/Non transparent framing
Using unicode byte order mask (BOM) – disable/
enable
parameters section.
Operator
profiles section.
Contextual help of the web interface – 107
Settings
Viewer