Eaton Network-M2 User Manual page 63

• To initiate the sequence when the battery reaches the set capacity in (%)
• To initiate or end the shutdown sequence after the set time in (s) before the end of backup time.
When there are several conditions to start the shutdown sequence, the shutdown sequence will start as soon as one of the
condition is reached.
When primary shuts OFF, both group1 and group 2 shut OFF immediately.
So if Primary is set to Immediate OFF, groups policies should be restricted to Immediate OFF.
d Settings examples
All the following examples are using below agent's settings.
Example 1: Maximize availability
→ Shutdown time: 210s
Contextual help of the web interface – 63
Protection