Eaton Network-M2 User Manual page 181

When restoring the file, the corresponding setting will be updated based on the cyphered value.
4.16.1.2.2 The JSON file is saved
All sensitive data will have below structure:
When restoring the file, the corresponding setting will not be set.
This may lead to restoration failure if corresponding setting was not previously set with a valid value.
4.16.1.3 Modifying JSON file examples
4.16.1.3.1 Modifying sensitive data
To change sensitive data, plain text must be filled with the new value and the Cyphered entry (if existing) must be removed:
4.16.1.3.2 Adding local users
Adding or modifying local users is not yet available, only the predefined account (main administrator) can be modified.
4.16.1.3.3 Modifying SNMP settings
Original file:
SNMP disabled
Saving/Restoring/Duplicating Network module configuration settings
without
passphrase
Modified file:
SNMP enabled on port 161
SNMPv1 disabled
SNMPv3 enabled
2 x accounts
1 x read only user (enabled) with Auth-Priv security level and passwords
1x read write user (enabled) with Auth-Priv security level and passwords
1 x active trap
Servicing the Network Management Module – 181