Alarm Configuration - Eaton Network-M2 User Manual

2- Launch the discovery.
3.6.1.5.1 For other issues
For details on other issues, see the Troubleshooting section.

3.6.2 Alarm configuration

Humidity, temperatures or dry contacts deactivated during commissioning are not displayed.
Gauge color code:
• Green: Value inside thresholds.
• Orange/Red: Value outside thresholds.
• Grey: No thresholds provided by the device.
3.6.2.1 Temperature
The table shows the following information and settings for each sensor:
• Name
• Location
• Enabled – yes/no
• Low critical threshold – xx°C or xx°F
• Low warning threshold – xx°C or xx°F
• High warning threshold – xx°C or xx°F
• High critical threshold – xx°C or xx°F
• Hysteresis – x°C or x°F
• Visual update
• Live reading (MIN-MAX shows the minimal and maximal temperature measured by the sensor)
3.6.2.1.1 Actions
a Set Enabled
Select and directly change the setting in the table and then Save.
When disabled, no alarm will be sent.
b Set alarm threshold
Enable the alarm first and then change the setting in the table and then Save.
When a warning threshold is reached, an alarm will be sent with a warning level.
When a critical threshold is reached, an alarm will be sent with a critical level.
Contextual help of the web interface – 73
Environment