Eaton Network-M2 User Manual page 218

Default settings and possible parameters
Default settings and possible parameters - Modbus
Modbus RTU
Modbus TCP
Mapping configuration
Default settings and possible parameters - Certificate
Local certificates
Information – 218
Default setting
Enabled — Inactive
Baud rate (bps) — 19200
Parity — Even
Stop bits – 1
Enabled — Inactive
Port — 502
No mapping
Default setting
Common name — Service + Hostname + selfsigned
Country — FR
State or Province — 38
City or Locality — Grenoble
Organization name — Eaton
Organization unit — Power quality
Contact email address — blank
Possible parameters
Enabled — Inactive/Active
Baud rate (bps) —
1200/2400/4800/9600/19200/38400/57600/1152
00
Parity — None/Even/Odd
Stop bits – 1/2
Enabled — Inactive/Active
Port — x-xxx
Name – 128 characters maximum
Map – Eaton ModbusMS compatible
Transport – RTU/TCP
Device ID – from 1 to 247
Access – None/Read only/Read/Write
Illegal read behaviour – Return exception/Return
zeros
Coil/register base address shift – No shift/Shift
by 1 (JBUS)
Possible parameters
Common name — 64 characters maximum
Country — Country code
State or Province — 64 characters maximum
City or Locality — 64 characters maximum
Organization name — 64 characters maximum
Organization unit — 64 characters maximum
Contact email address — 64 characters maximum