Eaton Network-M2 User Manual page 108

Settings
3.7.4.5 CLI commands
netconf
Description
Tools to display or change the network configuration of the card.
Help
For Viewer and Operator profiles:
netconf -h
Usage: netconf [OPTION]...
Display network information and change configuration.
-h, --help
-l, --lan
-4, --ipv4
-6, --ipv6
-d, --domain
For Administrator profile:
Contextual help of the web interface – 108
display help page
display Link status and MAC address
display IPv4 Mode, Address, Netmask and Gateway
display IPv6 Mode, Addresses and Gateway
display Domain mode, FQDN, Primary and Secondary DNS