Shutdown On Power Outage - Eaton Network-M2 User Manual

3.5.3.2.2 Delete
Select a schedule shutdown and press the Delete button to delete the scheduled shutdown.
3.5.3.2.3 Edit
Press the pen icon to edit schedule shutdown and to access the settings:
3.5.3.3 Access rights per profiles
Protection/Scheduled
shutdowns
3.5.3.3.1 For other access rights
For other access rights, see the
3.5.3.4 Troubleshooting
Action not allowed in Control/Schedule/Power outage policy
Symptom
Below message is displayed when you access the Control, Schedule or Power outage policy page.
This action is not allowed by the UPS.
To enable it, please refer to the user manual of the UPS and its instructions on how to configure the UPS settings and allow
remote commands.
Possible Cause
1- Remote commands are not allowed due to the UPS configuration (see the action below)
2- The UPS does not support remote commands.
Action
Refer to the UPS user manual and its instruction on how to configure the UPS settings and allow remote commands.
Example: UPS menu Settings>>>ON/OFF settings>>>Remote command>>>Enable.
3.5.3.4.1 For other issues
For details on other issues, see the Troubleshooting section.

3.5.4 Shutdown on power outage

These setting are in conjunction with the shutdown agents and control how the network module directs the shutdown of protected
servers and appliances. It gives the possibility to prioritize and schedule shutdown actions so that the IT system is powered down
Administrator
Information>>>Access rights per
Operator
profiles section.
Contextual help of the web interface – 61
Protection
Viewer