Network Module Alarm Log Codes - Eaton Network-M2 User Manual

List of event codes

7.5.6 Network module alarm log codes

To retrieve Alarm logs, navigate to
Below codes are the one to be used to add "Exceptions on events notification" on email sending configurations.
Some zeros maybe added in front of the code when displayed in emails or logs.
7.5.6.1 Warning
7.5.6.1.1 Protection
Code Severity Active message
1032 Warning Protection: immediate shutdown in progress Protection: immediate shutdown completed
1053 Warning Protection: communication lost with agent
7.5.6.1.2 Alarms
Code Severity
1303 Warning
7.5.6.2 Info
7.5.6.2.1 Protection
Code Severity Active message
1016 Info Protection: sequential shutdown scheduled
1017 Info Protection: sequential shutdown in progress Protection: sequential shutdown completed -
1054 Info Protection: agent is in unknown state
1055 Info Protection: agent is starting
1056 Info Protection: agent is stopping
1057 Info Protection: agent is stopped
1100 Info Schedule: shutdown date reached
7.5.6.2.2 Communication
Code Severity Active message
1300 Info Communication: No device connected Communication: Communication with the device is back -
1301 Info Communication: Device not supported Communication: Communication with the device is back -
Information – 238
Contextual help>>>Alarms
Non-active message
Protection: communication recovered with agent -
Active message
Alarms: the number of alarms is too
high and above 6 000
Non-active message
Protection: sequential shutdown canceled
Protection: agent is in service
Protection: agent is in service
Protection: agent is in service
Protection: agent is in service
Schedule: shutdown initiated
Non-active message
section and press the Download alarms button.
Non-active message
Alarms: the number of alarms is
back to normal
Advice
-
Advice
2 000 alarms have been
erased and saved in a
backup file.
Advice
-
-
-
-
-
-
Advice