Eaton Network-M2 User Manual page 142

Maintenance
3.8.3.1.4 Save
Below settings are not saved:
Local users other than the main administratorSensor settings (commissioning, alarm configuration)
To save the Network module settings:
1. Click on Save
2. Select to include the Network settings if needed.
A passphrase need to be entered twice to cypher the sensitive data.
3. Click on Save
3.8.3.1.5 Restore
Restoring settings may result in the Network module reboot.
To restore the Network module settings:
1. Click on Restore
2. Select to include the Network settings if needed.
3. Enter the passphrase used when the file was saved.
4. Click on Choose file and select the JSON file
Contextual help of the web interface – 142