4.16.2 " Calibration Programs " displaying
Set the main switch (placed on the back of the ventilator) to " I ".
4-70
Select Self Test to switch to the normal operation of the lung ventilator
(see chap 4.2).
Select Power Off to switch-OFF the lung ventilator.
Make sure that on the lung
ventilator keyboard (User
commands area) the green
led (that indicates the
presence of mains power
supply) is ON.
In sequence, keep pressed
for a few seconds the
ALARM RESET and ON-
OFF soft keys to switch-up
the lung ventilator.
The Calibration Programs
page is displayed.
User manual, DU3104101