Ventilation Phase - Siare Falco 202 Evo User Manual

4.8

Ventilation phase

Before starting the ventilation, you have to:
•
•
•
•
Based on the PRP set by the User according to the patient's characteristics,
the lung ventilator is able to display and measure a series of values
necessary for the patient's clinical evaluation.
•
•
•
•
•
Falco 202 Evo
carry out all lung ventilator connections (medical gases, power supply,
patient circuit, ........)
carry out the preliminary checks (please see chap. 3.4)
set and check the patient data, language and alarm limits
set the Physiological Respiratory Parameters and the operative mode
that match the patient's clinical situation best.
On the left side of the display you can find PRP parameters.
In the main section you can see the Charts that show the trend of the
respiratory parameters.
On the right side of the display you can find values that will help you
asses the patient's clinical condition.
In the upper part the Operative Mode is displayed as well as both Start
and Stop controls for the ventilation and the message for active alarms.
At the bottom, the Functions to be activated by the user as well as time
and status of the power supply are available.
•
Press START to begin the
ventilation in the selected
mode with the most suitable
PRP for the clinical situation
of the patient.
4-47