Replacing The Color Wheel - Christie HS 2K Series Service Manual

8. Gently pull the lens out of the lens holder.
9. Install the new lens.
a. Align the top of the lens with the red marker on front cover.
b. Insert the lens into the projector and turn it clockwise until you hear a clicking sound.
c. Use a M3 Allen key to tighten the screw on the Lens Release button.

Replacing the color wheel

Replacing the color wheel must be done in a clean room.
To remove the color wheel, complete the following steps.
1. Remove the top cover.
See Removing the top cover
2. Remove the main board module.
See Replacing the main board
3. Remove the main board bottom shielding.
See Removing the rear cover
HS Series 2K Service Manual—DWU1612-HS, DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
on page 94.
on page 59.
Optics
84