Table of Contents
Advertisement
Chapter 6. ETHERNET-BASED
6.1
Overview
Ethernet-based Remote Product Management of the MBT-5000A L-Band Up/Down Converter
System is available using the rear panel 'J9 10/100 Ethernet' port.
1. To proceed with Ethernet-based Remote Product Management, assumptions
are made that:
2. Use of the Ethernet based SNMP Interface is recommended only for
advanced users. All other users are strongly encouraged to use the
MBT-5000A HTTP Interface for Monitor and Control (M&C) of the MBT-5000A.
Ethernet-based Remote Product Management
REMOTE PRODUCT
•
The MBT-5000A is operating with the latest version firmware files.
•
The MBT-5000A is connected to a user-supplied Windows-based PC
as follows:
The PC's serial port is connected to the MBT-5000A rear panel 'J1
o
COM 1' serial port with a user-supplied serial cable.
The PC's Ethernet port is connected to the MBT-5000A rear panel
o
'J9 10/100 ETHERNET' port with a user-supplied hub, switch, or
direct Ethernet cable connection.
The PC is running a terminal emulation program (for operation of
o
the MBT-5000A serial remote control interface) and a compatible
Web browser (for operation of the MBT-5000A HTTP (Web Server)
Interface).
•
The MBT-5000A's Management IP Address has been noted using the
MBT-5000A Front Panel.
MBT-5000A L-Band Up/Down Converter System
MANAGEMENT
6–1
Revision 1
MN-MBT-5000A
Advertisement
Table of Contents
