6.5.5.2.2 Admin | Snmp - Comtech EF Data MBT-5000A Installation And Operation Manual

6.5.5.2.2 Admin | SNMP

Use this page to set and returns administration information for the MBT-5000A SNMP feature.
SNMP
•
Simple Network Management Operational Status: Use the drop-down list to select the
Simple Network Management operational setting as Enabled or Disabled.
•
The SNMP Read and Write Community String fields can be any combination of
characters and a length of 0 - 20 characters:
o
o
•
Enable Authentication Trap: Use the drop-down list to select the Enable Authentication
Trap operational setting as Enabled or Disabled.
•
The Administrator can assign up to two SNMP Trap IP addresses and one SNMP Trap
Community String. The SNMP Trap Community String field can be any combination of
characters and a length of 0 - 20 characters:
o
•
Trap Version: Use the drop-down list to select the SNMP Trap Version as SNMPv1 or
SNMPv2.
For details pertaining to the remaining configuration parameters available on this page, see Sect.
6.3 SNMP INTERFACE.
Click [Submit SNMP] to save. If it is desired to revert to the previously assigned SNMP
designations, click [Reset] instead.
Ethernet-based Remote Product Management
Figure 6-5. Admin | SNMP Page
The factory default for the Read Community String parameter is public.
The factory default Write Community String is private.
The factory default for the Trap Community String is comtech.
MBT-5000A L-Band Up/Down Converter System
6–16
Revision 1
MN-MBT-5000A