6.5.5.2
Admin Pages
The Admin pages are available only to users who have logged in using the
Administrator Name and Password.
The Administrator may use these pages to: Set up user names, passwords, the e-mail server,
and the host IP Addresses as required for communication with the MBT-5000A Web Server
Interface.
Click the Access or SNMP tab to continue.
6.5.5.2.1 Admin | Access
Use this page to set up and maintain user names, passwords, the e-mail server, and the host IP
addresses to facilitate communication with the MBT-5000A Web Server Interface.
Network Maintenance
•
IP Gateway, IP Address/Range: Enter the desired IP Gateway Address and IP Address/
Range in these text boxes.
•
MAC Address (read-only): The MAC is set at the factory to a guaranteed unique address
that you cannot modify.
Click [Change IP Address] to save. If it is desired to revert to the previously assigned IP
Gateway and IP Address/Range, click [Reset] instead.
Ethernet-based Remote Product Management
MBT-5000A L-Band Up/Down Converter System
Figure 6-4. Admin | Access Page
6–14
Revision 1
MN-MBT-5000A
Need help?
Do you have a question about the MBT-5000A and is the answer not in the manual?
Questions and answers