Remote:) Ethernet; Remote:) EthernetAddress; Remote:) EthernetGateway - Comtech EF Data MN/LBC4000.IOM Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Front Panel Operation
Finally, set the asynchronous character format. Use the [][] arrow keys to
select the parameter, and then the [][] arrow keys to select the desired
format (i.e., number of data bits; odd, even, or no parity; number of stop bits) as
8-N-1, 7-E-2, or 7-O-2.
Press [ENT].

6.2.3.2.3 (REMOTE:) ETHERNET

The LBC-4000 L-Band Up/Down Converter System, as initially released,
does not feature a rear panel '10/100 ETHERNET' port. Only current
production units offer Ethernet Interface operation. See Chapter 4.
REAR PANEL CONNECTORS for more information.
On the top line, use the [][] arrow keys to select ADDRESS, GATEWAY, or
SNMP. (The bottom line displays the read-only unit MAC address.) Press [ENT].
6.2.3.2.3.1 (REMOTE:) ETHERNETADDRESS
Edit the Management IP Address and Range for the rear panel '10/100
ETHERNET' port. Use the [][] arrow keys to select a digit, and then the
[][] arrow keys to change its value. Press [ENT].
6.2.3.2.3.2 (REMOTE:) ETHERNETGATEWAY
Edit the IP Gateway Address for the rear panel '10/100 ETHERNET' port. Use the
[][] arrow keys to select a digit, and then the [][] arrow keys to change
its value. Press [ENT].
ADDRESS GATEWAY SNMP
MAC = 00-06-B0-00-00-0F
IP Address/Range:
192.168.001.002/24
Ethernet IP Gateway:
192.168.001.002
6–10
MN/LBC4000.IOM
Revision 5