Comtech EF Data MBT-5000A Installation And Operation Manual page 54

2. Next, create a temporary folder (subdirectory) on the user PC for the firmware archive
download. There are several ways to create a temporary folder on a Windows-based
PC:
•
•
a. Use the Windows Desktop to create and rename the temporary folder.
•
•
b. Use Windows Explorer to create and rename the temporary folder.
•
•
Upgrading Firmware
Drive letter "c:" is used in these examples. Any valid, writable drive letter
can be used.
Typical for all tasks: Type the command without quotes, and then press
Enter to execute.
Right-click anywhere on the desktop to open the popup submenu, and then
select New > Folder to create a temporary folder on the desktop.
Right-click on the new folder and then select "Rename" from the popup
submenu. Rename this folder to "MBT5000A" or some other convenient, unused
name.
Select File > New > Folder to create a temporary folder. This creates the new
folder in the active folder.
Right-click the "New Folder" folder name, and then rename this folder to
"MBT5000A" or some other convenient, unused name:
MBT-5000A L-Band Up/Down Converter System
4–5
Revision 1
MN-MBT-5000A