Table of Contents
Advertisement
c. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
•
•
•
•
d. Use Windows Command-line to create the temporary folder.
•
•
There should now be a tempory folder created and available for placement
of the firmware file download.
Upgrading Firmware
Select [Start] on the Windows taskbar, and then click the Run... icon. This opens
the 'Run' window.
Click [Browse] in the 'Run' window. This opens the 'Browse' window.
Click the Create New Folder icon in the 'Browse' window. This creates the new
folder.
Right-click the "New Folder" folder name, and then rename this folder to
"MBT5000A" or some other convenient, unused name:
Click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS-DOS
Prompt icon from the Main Menu).
Open a Command-line window...
For Windows 95 or Windows 98, type "command" (or, for any Windows
o
OS versions later than Windows 98, type "cmd" or "command"):
Alternately, from [Start], select All Programs > Accessories >
o
Command Prompt.
Finally, from the Command-line prompt (c:\>), type "mkdir MBT5000A"
o
or "md MBT5000A" (mkdir and md stand for make directory), and then
click [OK]:
MBT-5000A L-Band Up/Down Converter System
4–6
Revision 1
MN-MBT-5000A
Advertisement
Table of Contents
