Table of Contents
Advertisement
3.3
MBT-5000A Ground and Power Connections
3.3.1
Chassis Ground Interface
CAUTION – PROPER GROUNDING PROTECTION IS REQUIRED. The equipment
must be connected to the protective earth connection at all times. It is therefore
imperative that the unit is properly grounded, using the ground stud provided on
the unit rear panel, during installation, configuration, and operation.
The AC power interface provides the safety ground.
Rear Panel Connections
(Optional Redundancy Unit w/Standard AC Power Shown)
Figure 3-4. MBT-5000A Chassis – Common Ground Interface
This #10-32 stud is located at a common chassis location to the left-hand side
of the standard AC, optional dual AC, or optional DC power module (Figure
3-4). Use this stud for connecting a common chassis ground among
equipment.
MBT-5000A L-Band Up/Down Converter System
3–12
Revision 1
MN-MBT-5000A
Advertisement
Table of Contents
