Table of Contents
Advertisement
6.5.5.3.3 Config | Redundancy
Appendix B. MBT-5000A REDUNDANCY OPERATION.
Use this page to configure the MBT-5000A's Redundancy Switch Mode.
Use the drop-down list to Enable or Disable Redundancy Mode. Then, click [Change
Redundancy Mode] to update MBT-5000A operation to this selected Redundancy Mode status.
Ethernet-based Remote Product Management
Figure 6-8. Config | Redundancy Page
6–22
MBT-5000A L-Band Up/Down Converter System
Revision 1
MN-MBT-5000A
Advertisement
Table of Contents
Need help?
Do you have a question about the MBT-5000A and is the answer not in the manual?
Questions and answers