Figure 1-2. Mbt-5000A Operational Schematics - Comtech EF Data MBT-5000A Installation And Operation Manual

MBT-5000A L-Band Up/Down Converter System
Revision 1
When configured with the redundancy option, the system may contain two diode "OR-ed" internal
power supplies for increased reliability and microprocessor-based Monitor and Control (M&C)
functionality.
Figure 1-2 depicts the operational schematics for typical MBT-5000A L-Band Up/Downconverter
System single thread (standalone) and redundant applications. For more information about the
MBT-5000A's use in redundant applications, see Appendix B. MBT-5000A REDUNDANCY
OPERATION.
MBT-5000A Single Thread (Standalone) Application
MBT-5000A Redundant Application (Single LNA Application shown)

Figure 1-2. MBT-5000A Operational Schematics

Introduction 1–2 MN-MBT-5000A