J9 | 10/100 Ethernet' 10/100 Baset M&C Port (Rj-45); Table 3-2. 'J9 | 10/100 Ethernet' Connector Pinout - Comtech EF Data MBT-5000A Installation And Operation Manual

3.2.3.3 'J9 | 10/100 ETHERNET' 10/100 BaseT M&C Port (RJ-45)
Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
This standard RJ-45 female modular jack is used for product M&C using Simple
Network Management Protocol (SNMP), Telnet, and Hypertext Transfer Protocol
(HTTP). It is also used for MBT-5000A firmware updates. A CAT5e Unshielded Twisted
Pair (UTP) cable is used to connect to an Ethernet hub, router, switch, personal
computer (PC), etc.
Pin #
1
2
3
4
5
6
Rear Panel Connections

Table 3-2. 'J9 | 10/100 ETHERNET' Connector Pinout

Description
Tx+
TX-
Rx+
N/A
N/A
Rx-
MBT-5000A L-Band Up/Down Converter System
3–8
Revision 1
Direction
Out
Out
In
In
MN-MBT-5000A