Prime Power Connection; Cable Connections; Rear Panel Connections; Table 2. Rear Panel Connectors - Comtech EF Data DT-4572 Installation And Operation Manual

DT4572 X-Band Down Converter
Installation
2.3 P P
RIME OWER
The detachable power cord mates with the AC Prime power receptacle on the rear of the
converter chassis. A power cord for connection to 90 to 125 VAC, or 205 to 240 VAC,
power sources is provided with the converter.
2.4 C C
ABLE ONNECTIONS
Connect the signal cables to the connectors on the rear panel as shown in Figure 6. The
cable signal functions are listed in Table 2.
2.4.1 R P
EAR ANEL
Connector
Prime Power
J1
J2
J3
J4
J5
J6
J7
J8
J9
P1
C
ONNECTION
C
ONNECTIONS

Table 2. Rear Panel Connectors

AC Prime Power Input (AC POWER), Optional –48 Vdc
Serial Communications Interface for EIA-485 or EIA-232C COMM links (COM 1).
External Reference Oscillator Input
High Speed Bus (HSB)
Converter IF Input (IF).
Converter RF Output (RF).
IF TSM Switching Loop Input (LP IN).
RF TSM Switching Loop Input (LP IN).
IF TSM Switching Loop Output (LP OUT).
RF TSM Switching Loop Output (LP OUT).
Summary Fault Output (RELAY).
Description
10
Rev. 0
MM/DT4572.IOM