Programmable Keys - Yealink T54S Administrator's Manual

all calls to Bill (4603), you can press the line key 1 to deactivate always forward, or press line key 2 to
switch the forward target and forward all calls to Tom (4605).
Example: Setting a Line Key as BLF List key
The following example shows configuration for a BLF List key.
Scenario Conditions
phone_setting.auto_blf_list_enable = 0
Example
linekey.1.type = 39
linekey.1.line = 1
After provisioning, a BLF List key displays on line key 1. You can easily use this key to monitor a remote
line. The monitored line depends on a pre-configured SIP server.
Example: Setting a Line Key as Private Hold key
The following example shows configuration for a Private Hold key.
Example
linekey.1.type = 20
linekey.1.label = Private Hold
After provisioning, you can press the line key 1 to hold calls without notifying other phones registered
with the shared line, the shared line displays active to others shared line. It is only applicable to Shared
Line Appearance.
Example: Setting a Line Key as Multicast Paging key
The following example shows configuration for a Multicast Paging key.
Example
linekey.1.type = 24
linekey.1.value = 224.5.6.20:10008
linekey.1.label = Sales
linekey.1.extension = 2
After provision, you can press the line key 1 to send announcements quickly to the Sales group.

Programmable Keys

You can customize the programmable keys, including soft keys, navigation keys and function keys. This
feature is typically used to access frequently-used functions, to create menu shortcuts to frequently-used
phone settings; or, if your phone does not have a particular hard key, you can create a soft key. For
example, if the phone does not have a Do Not Disturb hard key, you can create a Do Not Disturb soft key.
The programmable key takes effect only when the IP phone is idle.
Related Topic
BLF List Configuration
Phone Customization
175