Changing The Time And Date Format; Setting A Key As Send - Yealink SIP-T29G User Manual

Yealink T2 Series IP Phones User Guide
Before You Begin
Check with your system administrator to find out if the manual mode has been enabled.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Time & Date->Manual Settings.
For the SIP-T29G IP phones, navigate to Menu->Basic->Time & Date->General->Manual Settings.
2. Enter the date and time in the corresponding fields.
For the SIP-T29G IP phones, you can also press the up or down navigation key to select the desired date and time.
3. Press Save.
The time and date set on the phone will be changed accordingly.

Changing the Time and Date Format

You can customize the date with various time and date formats.
The built-in date formats are listed as below:
Date Format
WWW MMM DD
DD-MMM-YY
YYYY-MM-DD
DD/MM/YYYY
MM/DD/YY
DD MMM YYYY
WWW DD MMM
Note
Your system administrator can customize the date format.
Procedure
1. Navigate to Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
For the SIP-T29G IP phones, navigate to Menu->Basic->Time & Date->Time & Date Format.
2. Select the desired date format from the Date Format field.
3. Select the desired time format from the Time Format field.
4. Press Save.

Setting a Key as Send

You can set the "#" key or "*" key to perform as a send key while dialing.
Procedure
1. Navigate to Menu->Features->Key As Send.
For the SIP-T29G IP phones, navigate to Menu->Features->Others->General.
32
Example (2016-09-02)
Fri, Sep 02
02-Sep-16
2016-09-02
02/09/2016
09/02/16
02 Sep, 2016
Fri, 02 Sep