Voice Mail; Setting The Voice Mail Code; Setting A Voice Mail Key For A Specific Line; Leaving Voice Mails - Yealink W60P User Manual

Yealink W53P & W60P User Guide
1. Enter the call pull feature access code (for example, *11).
2. Press OK, Speakerphone key or Off-hook key.

Voice Mail

Voice Mail feature allows you to leave voice mails for someone or listen to your voice mail messages on your IP
phones. This feature is set up on the server side and not all servers support this feature.
Topics

Setting the Voice Mail Code

Leaving Voice Mails

Listening to Voice Mails

Setting a Voice Mail Key for a Specific Line

Setting the Voice Mail Code
If you want to connect your phone to the message center, you need to set the voice mail code on your phone.
Before You Begin
1. Navigate to OK->Voice Mail->Set Voice Mail.
2. Select the desired line, and then press Select.
3. Select Enabled from the Status field.
4. Enter voice mail code in the Number field.
5. Press OK.
Setting a Voice Mail Key for a Specific Line
You can set digit key 1 as a voice mail key for a specific line. When the handset is idle, you can long press this key, and
quickly access the voice mails without scrolling through the menu.
Procedure
1. Navigate to OK->Voice Mail->Set Key 1.
2. Select the desired line, and then press Select.
Leaving Voice Mails
You can leave a voice mail to someone when he or she is busy or inconvenient to answer the call. Follow the voice
prompts from the system server to leave a voice mail, and then hang up.
Listening to Voice Mails
Before You Begin
You need to set the voice mail code in advance.
Procedure
1. Navigate to OK->Voice Mail->Play Message or press Message key.
2. Select the desired line, and then press Select.
The handset dials out the voice mail code using the selected line automatically.
3. Follow the voice prompt from the system server to listen to your voice mails.
66