Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual page 328

Commissioning (software)
7.21 Quantity structures
As well as the maximum number of available performance points, the maximum quantity
structure of a functionality must also be taken into account (e.g. max. 6 servo drives with 125 µs
current controller cycle clock).
Note
The following method just serves as a rough estimation of the possible quantity structures. It
is not a substitute for dimensioning with the SIZER configuration tool.
Higher utilization can result through the use of SINAMICS function modules (e.g. extended
messages / monitoring functions) or with a DP Integrated cycle clock < 0.5 ms.
Table 7-20 Estimation of the possible quantity structure
Information on dimensioning
Functionality Characteristic
Line Module ALM/SLM with
5)
DRIVE-CLiQ
BLM
Servo 125 μs
1)
250 μs
2nd encoder Not relevant
DO encoder 1 ms
Vector 250 μs
1)
500 μs
V / f
500 μs
Safety Extended/ 12 ms
Advanced Function
TB30 Not relevant
TM15 DI/DO 250 μs
1 ms
4 ms
TM31 250 μs
1 ms
4 ms
TM41 125 μs / 2 ms
(SIMOTION oper‐ 125 μs / 4 ms
ating mode) 250 μs / 4 ms
TM54F ---
TM15/TM17 Not relevant
CX32-2 Not relevant
328
max. number
2)
1
1
6
6
6
19
3
6
12
Depending on
the drive
1
8
3)
8
3)
8
4) 3)
4)
4)
1
3)
8
3)
6
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
Performance points
1.3
0.4
2 For each
drive
1.2 For each
drive
2 encoder/ 0.1
drive
0.4 For each DO
4 For each
drive
2 For each
drive
1 For each
drive
0.25 For each
drive
0.1
0.5 For each TM
0.2
0.1
0.5 For each TM
0.25
0.2
1 For each TM
1
0.5
0.5 For each TM
1 For each TM
0.3 For each
CX32-2
Your dimensioning (example)
Quantity SUM of the perform‐
ance points
1 1.3
6 12
6 1.5
SIMOTION D4x5-2