Preface - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Preface

Contents of this commissioning and hardware installation Manual
This document is part of the SIMOTION D documentation package.
Scope
The SIMOTION D4x5‑2 Commissioning and Hardware Installation Manual is valid for the
SIMOTION D4x5‑2 control units as well as for the CX32‑2, CBE30‑2, and TB30 supplementary
system components.
A separate
for the SIMOTION D425, SIMOTION D435 and SIMOTION D445/D445‑1 devices including
the CX32, CBE30 and TB30 system components.
The software configuration is described in this manual based on SIMOTION SCOUT and
SIMATIC STEP 7 Version V5.x.
Information of configuration of the SIMOTION D Control Units in the Engineering Framework
Totally Integrated Automation Portal (SCOUT in the TIA Portal), you will find in the configuration
manual
The TIA Portal requires at least SIMOTION SCOUT V4.4 and SIMOTION D4xx‑2 Control Units
as of firmware V4.3.
Standards
The SIMOTION system was developed in accordance with ISO 9001 quality guidelines.
Information in this manual
The following is a description of the purpose and use of this Commissioning and Hardware
Installation Manual:
● Description
Provides information about the SIMOTION system and its integration in the automation
environment.
● Installing
Provides information on the various installation options for the device.
● Connecting
Provides information about connecting and cabling the various devices, and about
communications interfaces.
● Commissioning (hardware)
Provides information on commissioning the device.
● Parameter assignment / addressing
Provides information on configuring and parameterizing the various bus systems.
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5 Commissioning and Hardware Installation Manual is available
SIMOTION SCOUT TIA .
3