Configuration Of Local Measuring Inputs; Configuration Of Output Cams / Cam Tracks - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Figure 7-61 Configuration of a global measuring input for the D4x5-2
Detailed information on the configuration of the TO measuringInput can be found in the
SIMOTION Output Cams and Measuring Inputs Function Manual.
7.13.2

Configuration of local measuring inputs

Local measuring inputs are drive-related measuring inputs. The configuration is performed via
drive parameters.
For further details, see:
● Section Configuration of drive-related I/Os (without symbolic assignment) (Page 413) in
the appendix
SIMOTION Output Cams and Measuring Inputs Function Manual
●
7.13.3

Configuration of output cams / cam tracks

Overview
The type of cam output must be selected during the configuration of the TO outputCam and
TO camTrack.
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
7.13 Configuration of the technology objects and I/O variables
Commissioning (software)
289