Installing
3.3 Installing supplementary system components
The CBE30-2 cannot be used with the SIMOTION D4x5-2 DP.
Requirement
Note
The CBE30-2 Ethernet communication board may only be inserted and removed when the
D4x5-2 DP/PN control unit and the CBE30-2 are de-energized.
Procedure
A CBE30-2 is installed in the option slot of the control unit.
Figure 3-7
3.3.3
Installing the CX32-2
Overview
The CX32‑2 can be installed in several ways.
44
Installing the CBE30-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
SIMOTION D4x5-2