Assignment Of The Profibus Addresses In Hw Config - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

Parameter assignment / addressing
6.3 Configuring PROFIBUS DP
X126 X136
DP DP/MPI
DP master, iso‐ DP master, not
chronous isochronous
DP master, iso‐ DP slave, not
chronous isochronous
DP master, not DP master, iso‐
isochronous chronous
DP slave, not DP master, iso‐
isochronous chronous
DP master, not DP master, not
isochronous isochronous
DP slave, not DP master, not
isochronous isochronous
DP master, not DP slave, not
isochronous isochronous
DP slave, not DP slave, not
isochronous isochronous
DP slave, iso‐ DP slave, not
chronous isochronous
DP slave, not DP slave, iso‐
isochronous chronous
For detailed information about controlling synchronization across the application, see the
Functions for Modular Machines Description of Functions.
Alternatively, the X136 interface can be used as an MPI interface with a transmission rate of
19.2 kbit/s up to 12 Mbit/s.
6.3.3

Assignment of the PROFIBUS addresses in HW Config

Assigning PROFIBUS addresses
In order for all devices to communicate with each other, you must assign a PROFIBUS address
to each device before connecting them:
Note
Before you assign any PROFIBUS addresses, please remember that all addresses must be
unique on the PROFIBUS subnet.
134
Remark
Application synchronized to DP master (X126)
Internal drive is synchronous with X126
Cycle clock X126 = cycle clock DP Integrated
Application synchronized to DP master (X126)
Internal drive is synchronous with X126
Cycle clock X126 = cycle clock DP Integrated
Application synchronized to DP master (X136)
Internal drive is synchronous with X136
Cycle clock X136 = cycle clock DP Integrated
Application synchronized to DP master (X136)
Internal drive is synchronous with X136
Cycle clock X136 = cycle clock DP Integrated
Application synchronized to internal drive cycle clock
Application synchronized to internal drive cycle clock
Application synchronized to internal drive cycle clock
Application synchronized to internal drive cycle clock
Application synchronized to DP slave (X126) (can be moni‐
tored by the application)
Internal drive is synchronous with X126
Application synchronized to DP slave (X136)
(can be monitored by the application)
Internal drive is synchronous with X136
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
Actions in the application
None
None
None
None
None
None
None
None
DP slave synchroniza‐
tion mechanisms
DP slave synchroniza‐
tion mechanisms
Basic
SIMOTION D4x5-2