Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual page 46

Installing
3.3 Installing supplementary system components
Mounting the CX32‑2 on another CX32‑2
A description with photos of opening the cover can be found in Section Removing the cover
of the CX32-2 (Page 50).
Table 3-2 Mounting a CX32‑2 on another CX32‑2
Opening the covers.
Mounted bracket.
46
Unscrewing the screw
(M3, Torx T10)
Closing the cover.
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
The bracket must be moved so that the pin is
in the opening of the bracket. Tighten the
screw (tightening torque 0.8 Nm).
SIMOTION D4x5-2