Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual page 27

Component
Drive units with PROFI‐
BUS DP interface (e.g. SI‐
NAMICS S120)
Teleservice adapter
Ethernet
The Control Unit can communicate with the following components via the Ethernet interfaces
or be embedded in an automation environment:
Table 2-4
Component
Programming device (PG/PC)
Master computer
SIMATIC HMI device
PROFINET IO
The D4x5‑2 DP/PN can communicate with the following components via the onboard
PROFINET IO interface or via the Ethernet communication board (CBE30-2).
Table 2-5
Component
Programming device (PG/PC)
SIMATIC HMI device
Other controllers (e.g. SIMO‐
TION or SIMATIC)
Master computer
Distributed I/O systems
SIMATIC ET 200MP
SIMATIC ET 200M
SIMATIC ET 200SP
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
Function
... convert speed setpoints into signals for controlling the motors and
supply the power required to operate the motors.
Also can be operated as an isochronous slave on PROFIBUS DP.
Remote diagnostics
Components on the Ethernet
Function
... configures, parameterizes, programs, and tests with the "SIMO‐
TION SCOUT" engineering system (ES)
... communicates with other devices via UDP, TCP/IP
... is used for operating and monitoring functions. This is not an es‐
sential requirement for the operation of a Control Unit.
Components on the PROFINET IO
Function
... configures, parameterizes, programs and tests with the "SIMO‐
TION SCOUT" engineering system (ES).
... is used for operating and monitoring functions. This is not an es‐
sential requirement for the operation of a Control Unit.
... e.g. higher-level controller (plant controller); modular machine
concepts with multiple controllers, distributed across individual ma‐
chine modules.
... communicates with other devices via UDP, TCP/IP
Modular I/O system for cabinet installation and high channel densi‐
ties in the SIMATIC S7‑1500 packaging system. SIMAT‐
IC ET 200MP permits the shortest bus cycle times and fastest re‐
sponse time even with large volumes of data. With the time-based
I/Os, signals can be recorded or output to the precise µs.
Modular I/O system for cabinet installation and high channel densi‐
ties in the SIMATIC S7‑300 packaging system.
Finely scalable I/O system for cabinet installation; ET 200SP fea‐
tures a single-cable and multi-cable connection with push‑in termi‐
nals, compact dimensions, high performance, and low part variety.
With the time-based I/Os,
signals can be recorded or output to the precise µs.
Description
2.2 System components
27