Simotion D4X5-2 Device-Specific Notes - Siemens SIMOTION D4x5-2 Commissioning And Hardware Installation Manual

B.2

SIMOTION D4x5-2 device-specific notes

Note regarding SIMOTION D
Note
The product standard EN 61800-3 describes the EMC requirements placed on "Variable-speed
drive systems". As such, it defines different limits depending on the location of the drive system.
SINAMICS S120 power units are designed for use in the second environment. The term second
environment refers to all locations outside residential areas. These are basically industrial
areas which are supplied from the medium-voltage line supply via their own transformers.
The same installation instructions apply for the SIMOTION D4x5-2/CX32-2 Control Units as
for the SINAMICS S120 CU320-2 Control Units with regard to EMC.
It is essential to follow the installation instructions in the SINAMICS S120 Manuals in order to
ensure compliance with emitted interference and immunity values.
For further information on this topic also refer to the
SINAMICS Function Manuals.
SIMOTION D4x5-2
Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
Standards and approvals
B.2 SIMOTION D4x5-2 device-specific notes
SIMOTION PM 21 Catalog as well as the
421