Standard Section Of The Parameter Assignment Frame - Siemens SIMATIC IM 151/CPU Manual

Configuration Frame and Parameter Assignment Frame for the ET 200S
A.3 Structure of the Parameter Assignment Frame
All the parameterizable values of a DP slave are stored in the parameter
assignment frame.
Structure of the Parameter Assignment Frame
The length of the parameter assignment frame for the IM 151/CPU is 16 bytes:
Standard section; bytes 0 to 6
Parameters of the IM 151/CPU; bytes 7 to 15
Structure of the Standard Section
The first 7 bytes of the parameter assignment frame are standardized to
EN 50170, Volume 2, PROFIBUS and have the following contents:
Byte 0 08
Byte 1 01
Byte 2 06
Byte 3 0B
Byte 4 80
Byte 5 6C
Byte 6 00
Figure A-3
A-6
Station status
H
Watchdog factor 1
H
Watchdog factor 2
H
Response delay T
H
Manufacturer ID, high-byte
H
and 6D Manufacturer ID, low-byte
H H
Group ID
H

Standard Section of the Parameter Assignment Frame

RDY
ET 200S Interface Module IM 151/CPU
A5E00058783-01